When you just can't find that perfect number of DPI image!

I don't really fully understand Dots per Inch (DPI) and printing...the general gist of this post is that all is not lost with a low DPI image, it can be made printworthy! :D Moving on!

The photo, the touch up and the finished printed box. 

I wanted a miniature Doubl Glo holiday snow box, but the only image I could find of one was on eBay, and it was a photo of the box and the photo was 96DPI. It is recommended to use somewhere between 150 and 300DPI for miniaturizing. Because the Doubl Glo image was fairly simple, I used the paint function in PhotoImpression5 to improve the image for printing. PhotoImpression5 was a free software disc that came with my digital camera, so it's likely many people have something like this lying around.

And to find out what number of DPI your image is, right click on it, select properties from the box that pops up, and you will find the DPI number in there.

Using a flickr image from the lovely Joanne of Takeabreakwithme, I'll roughly explain how I improve those low DPI images for printing in 1:12 scale.

This is a 96DPI image.

Close up.

Disclaimer.. After reading a few online articles I assume that...

...if I was to print this image as it is on the left, the printer nozzle would attempt to replicate all of those tiny squares of black tones, red tones, etc. as best it could. The printer has a palette of only four "crazy" printer ink colours (black, yellow, magenta and cyan) to work with, carefully arranging many dots to simulate each of those tones, and then.... each ink dot will bleed into the paper, merging slightly with the dot next to it...fuzzy outcome highly likely.

Even just one colour tone needs to be simulated using many dots of ink from the palette of black, yellow, magenta and cyan. By having a uniform red tone, the printed red will be more intense and less fuzzy due to the printer not having to replicate those unnecessary tones.  

If you have Arcsoft PhotoImpression or some similar form of photo editing software, open the image and find the paint tools. Click on colour picker, which should look like a little ink dropper. Zoom in on the image and select your favourite tone of red from one of the many pixels to choose from.. 

Once you have selected your favourite red, click on the bucket of dripping paint, and choose solid fill and have the opacity set somewhat as shown (maybe a bit more in the middle...) and colour in your image.  If you find there are pixels that haven't been coloured, use the ink dropper on them, colour the whole area with the new colour, and then turn it back to red (make sure you have an area of red left somewhere before doing this..otherwise just leave the pixels and colour them in manually with the spray paint option)

If you have ever used MsPaint to paint with, you will know that it can paint in quite a disastrous blocky way, as it only enters pixels with the exact same tone of red. The opacity setting in photo editing paint tools helps the red "paint" bleed into all of the red toned pixels, in just a few clicks. You do need to play about with it, and if there is a disaster, ie. something not red, suddenly turns red, there is an undo button. 

A 96DPI print result, before and after, would have been good, but unfortunately my printer is still out of order. I used this method on the Christmas box and Firework printables, and they were all lower than 150DPI.

And the winner is....

Narina!!! Congratulations! :)

I hate where that arrow landed as it shows how incredibly close it was between both of you, could it not have landed in the middle of the triangle?! Sorry you have to see that Faby :D 

Narina, please send me your address to sarahnash635(at)btinternet(.)com   < (remove brackets, replace "at" with @) and I will have that cushion posted off to you ASAP! :)

Thanks.

1:12 scale Beachcombing!!!

Still in a strange haitus, thanks for your support in the last few posts everyone. I know we all get this from time to time :D  Nature has filled in quite a bit for me for this one.

Last week I dragged a friend to the beach, and then embarked on a long mini beach combing session.  Apparently it looked a bit strange and he suggested (if there is a) next time we should wear white overalls and fence the beach off, because it looked like a "crime scene investigation" was in progress. Not surprised either, finding tiny shells involves getting your eyes as close to the sand as possible and then carefully picking over it...I'll get him to take a photo of me in action!  Many people walked past and the odd dog got in the way, I don't remember much, just lots of coarse sand with the odd nice shell in it.

The Shells are a mix of Dogwhelks, Periwinkles (ridiculous amount of those), Flattops (Gibbula..) Cone shells (Turritella..) and cowries.

Driftwood twigs. You can break driftwood twig into smaller sizes and then sand the ends. The starfish are made using thick wire and soldered in the centre, the tips are rounded off with a file and then sponge painted.

I REALLY, REALLY LOVE THESE! Miniature Japanese style glass floats, made using crochet thread and marbles. I made one for Genevieve in a swap, though I've perfected them a bit since then, particularly the colour, Genevieve, if you want a refit, get in touch!  I used a brilliant video and picture tutorial by Sharon Ojala, which you can see below. Instead of using a wire ring, I made a loop in the middle of one of the eight threads needed.

Lovely little beach finds! Tiny limpet shells, sea glass and coral weed. The pretty little spiral one is a Gibbula Umbilicalis (thank goodness for Google :D )

Edit :-

I was just reading that a stunted version of Coral weed grows in high shore pools, which makes it perfect for miniatures eh? This is the skeleton of the plant, washed ashore.

Crates with rope handles (lollypop sticks and linen thread)

Er...yeah. getting there. The tomato leaves and flowers are from a Georgie Steed kit. Instead of using the red beads supplied I made little tomatoes with fimo, which came out a little RED! I had made the plant up, but then decided it was far too big and took it all apart, next time maybe....... :D

I almost managed to see this happen in a rock pool, but unfortunately there were two crabs fighting over the same shell, so I had to watch it on youtube instead..I should have flipped a coin for them and removed the loser :D

Little giveaway!

Very quick little giveaway, I was in Belfast the other day and saw this little padded heart lying in the doorway of a shop and thought someone had dropped their dollshouse cushion! :D  Unfortunately it doesn't go with my furniture, but I know there are plenty of little houses in Blogland where it would fit in perfectly and I really want to give it a good home! So just enter your name below and I'll do a draw on the first of August.

Usual rules apply. Be a follower of this blog and open to everyone worldwide. That's it.

Firstly, it's clean and in perfect condition! A bit redder than it is on my moniter. 3.7cm wide, 3.8cm high and 8mm thick, and I think the fabric is polyester, it's ever so slightly shiny.

Mieal Denab (in the comments) informed me that these are the little hearts from Build a Bear, which indeed they are! Thanks Mieal! :)

What would the Edwardians have made of it? Cute though. Oh it's also a bit stiff as you can probably tell, though in amongst other cushions I reckon this wouldn't be noticeable.

Good luck! :)

1:12 scale Garden Bench

This is a 1:12 scale customized Falcon miniature Park Bench.

The slats happened rather sooner than I thought.  I used lollypop stick wood for the new slats, which was treated with Pepper's magic silver wood solution, and then stained with Rustins Antique pine.  I was going to add bolts to the end of the slats, and also add some old flaked off paint and maybe a touch of lichen (as though it has been brought in from outside) but I haven't made my mind up yet...

The lollypop stick wood was a bit warped, which I think adds to the effect, though one slat was a little more warped than the others, so it casts a bit of a shadow. I wasn't too worried about precision, so the gaps are a little irregular, though it has been lying outside in all weathers! ;)

Think I'll have a cup of tea and a biscuit now! :D

Er..yes, I went against my own advice and messed about with that metal CONTAINING LEAD... I did sand it slightly here and there too. I got the jewellers saw out and (awkwardly) removed some of the "ledge" on either side of the bench ends. The metal is almost like butter to saw through, which is great, but you also have to be careful not to bend it, as after a few bends, it would snap right off.

I then painted it with Humbrol matt black paint, and didn't bother using primer :D

Next stop, tomatoes!

Thanks everyone for your encouraging comments in the previous post :)

Take a seat... but not for too long!

I know..long time no see! :D

 I'm just back from a slight case of miniature burnout. I've been burning the candle at both ends for the past few..*ahem* years :D Mountain of unfinished miniatures and non miniature work in my wake too, so I'm trying to organise myself better these days.  I work in a very small work space, so it doesn't take much to become a bit overwhelmed either. Gradually sorting myself out now...and the printer broke, which nearly sent me to the asylum :D

...please tell me I'm not alone in this madness...

I haven't actually made anything...but I have bought something. I was going to make my own cast iron park bench, but when I saw this one I thought I would cut that corner, and save time and sanity... This one is a "falcon" miniature bench, a little pricey, but it is based on a real Victorian design ( google Lion head antique park bench, and you'll see it's life size twin amongst the image results ). 

I think I will keep the ends black, but I am planning on replacing the slats. Although they are perfectly acceptable as is, I want them that little bit more refined..plus they're a bit orange. 

The ends are metal, and a bit bendy. I'm not going to remove the paint, at all, as the box it came in stated that there is lead in the product. I may go over it with a matt black paint though.

And there is her underbelly, so if you remove the slats, you don't have to worry about putting it back together again, as each end is connected with a rod.

And the slats pop off, fairly easily. I think I will sheer off those bolts and stick new slats straight on to the ledge. 

Yes..summer is definitely on the horizon :D Sods law, it was only like this when I was taking photos, sky clear before and after, but not during the photoshoot!

So hopefully next time I'm here, I will have the finished bench and possibly a finished one year old tomato plant..or is it two years old! :D Wish me luck.

Back up your blog.

 After reading Peppers recent post about reasons as to why people delete their blogs, I noticed a few people had mentioned some blogs had "changed", and were now flogging sunglasses, cameras, etc. I'd noticed a few blogs like this in the past year, this happens when a blog is hacked to steal the followers, basically they gain a free audience on the back of the hard work of the original blogger, nasty.  I also wondered if the host site might accidentally delete a blog, that does actually happen occasionally according to angry bloggers I found in a google search. So I thought it would be a good idea to backup my blog regularly, replacing the last copy with a new copy etc.

  It also means if you delete your blog for whatever reason, you'll still have a copy of it.  I've gotten rid of things in the past, and there is nothing worse than regret...Someone else is sitting on my great grandmothers chair right now!

Here's a little handy pictorial guide for those who need it.  I wouldn't be surprised if I'm the only one who has never thought of backing up my blog, and you've all been doing this for ages, but if I can reach one blogger like me, it's worth it :D

Starting from your blogger dashboard, where the reading list is etc, follow the arrows and click

Export blog.....Delete option is FAR too close for my liking, it should be on the other side of the page somewhere in the corner! Keep a steady hand on the mouse...and click on Export blog, wear glasses if you need them :D

The download will contain each post consisting of all words, photographs and comments but not the template. ie, your background, etc.

After you download your blog, it will be somewhere on your computer, you might even want to rename it so you can find it easily. Hopefully you will never need it, but...at least it's there for peace of mind.  I feel so much more relaxed now! :D

P.s. The file will be in XML format, and won't make a bit of sense, but if you were to import/upload it to blogspot, they will reconfigure it back to sense.