Translate

Showing posts with label brass. Show all posts
Showing posts with label brass. Show all posts

Tuesday, 29 May 2012

Brass Bed


This has been a long time in the making and gathering of materials. I had to measure and cut all the tubing by hand with a file, and then mark and drill all the holes by hand. I could not have done this without my vice. I haven't yet worked out exactly how much I spent, probably about £30- £40. It isn't exactly 1:12 scale. It measures 14.5 (l) x 11 (w) x 11 (h) cm. So if in the real world, its just over 5 1/2 feet long. I decided to make it shorter and slightly smaller than a double, but bigger than a single, so it wouldn't cramp the room too much. The materials for the bed frame are brass and copper tubing, angled brass, crimp beads, various metal beads, gold ear bullets, 1:12 scale brass door knobs, 1:12 scale castors and two small turned pieces of brass I bought from a model ship website. It's all held together with tiny copper tubing dowels in hand drilled holes (I used a small drill bit held in an Excel blade handle), using superglue and araldite.  The mattress is also handmade, it had to be, since the bed isn't "standard". I bought the material on Ebay (Piglets Pincushion). It is hand sewn together, stuffed and buttoned ( no buttons though, I used crochet thread). I kept the edges rigid by using lengths of acetate sewn inside, before it was turned inside out for stuffing and "buttoning". 



Bed with wooden posts in the bedroom,(testing the height, before cutting the tubing) which I then later replaced with brass tubing. Waste not, want not, those wooden posts are now being used in the construction of "plaster" brackets for my window ledges.



I've just noticed a bead I forgot to glue in place. 50p for scale.


The bed looks quite short from this angle, but I'm hoping with the right bedding, I should be able to hide that.  



And two chairs for the kitchen...

Two Mini Mundus kit chairs, rejigged, using model ship balusters and stencil stickers, needs a few more coats of paint. The chair back on the right,  unintentionally, looks like a cat. Both the chair pads are made from sample material I bought for 5p each in a market and stuffed with no hole beads.